Key data
| Regulation | Commission Implementing Decision (EU) 2026/2539 of 17 November 2026 |
|---|---|
| Amends | Implementing Decision (EU) 2024/2103 |
| Reference standard | Delegated Regulation (EU) 2019/945 on unmanned aircraft |
| Publication | 18 November 2026 |
| Entry into force | 17 November 2026 |
| Affected parties | Manufacturers, importers and operators of drones in the European Union |
| Category | European Regulation |
| Year | 2026 |
If you manufacture, import or distribute drones in Europe, this regulation affects you directly and is already in force. The Implementing Decision (EU) 2026/2539, published on 18 November 2026, amends Decision 2024/2103 to update the harmonized standards applicable to unmanned aircraft (drones) under the Delegated Regulation (EU) 2019/945.
The change is significant: harmonized standards are the technical standards whose compliance grants the presumption of conformity with the essential safety requirements mandated by European regulations. In other words: if your product does not comply with these updated references, you cannot presume to comply with the law, and that has direct consequences for CE marking and the ability to sell in the EU.
What does this regulation establish?
Harmonized standards are technical standards developed by European standardization bodies (such as CEN or CENELEC) at the request of the European Commission. When a manufacturer demonstrates that their product complies with these standards, it is automatically presumed that it also complies with the essential safety requirements of the corresponding European regulation.
This Implementing Decision updates the list of harmonized standards applicable to drones within the framework of the Delegated Regulation (EU) 2019/945, which regulates the technical and administrative requirements for civil unmanned aircraft and third-country operators.
| Aspect | Before (Decision 2024/2103) | After (Decision 2026/2539) |
|---|---|---|
| Harmonized reference standards | List in force since 2024 | List updated to November 2026 |
| Presumption of conformity | Based on previous standards | Based on new updated standards |
| Manufacturer obligation | Comply with standards of Decision 2024/2103 | Review and adapt to standards of Decision 2026/2539 |
The update means that the specific technical standards that serve as reference for drone certification have changed. Manufacturers who already had their products certified under the previous standards must check whether those certifications remain valid with the new references.
Economic and operational impact
The most immediate impact is on certification processes and CE marking. These are the cost scenarios that affected companies must assess:
- Technical compliance review: Any manufacturer with products already on the market must audit whether their designs and technical documentation remain valid under the new standards. This process may require hiring a notified body or specialized engineering services.
- Product redesign or adaptation: If the new standards introduce more stringent technical requirements, some models may need design modifications, which implies engineering costs, new testing and possible temporary suspension of production or commercialization.
- Risk of market withdrawal: Products that do not comply with the new harmonized standards may be subject to market surveillance measures, including removal from sale throughout the EU.
- Importers and distributors: Must verify that the equipment they market has the new regulatory references. Otherwise, they assume joint liability for the commercialization of non-compliant products.
The cost of inaction far exceeds the cost of reviewing compliance in time. Loss of CE marking is equivalent to the inability to sell in the European single market.
Who does it affect?
- Civil drone manufacturers based in or selling in the EU: must review their technical files and declarations of conformity.
- Importers of unmanned aircraft from third countries (China, USA, etc.): must ensure that imported products comply with the new standards before placing them on the European market.
- Distributors and resellers of drones in the EU: although they do not manufacture, they have obligations to verify the conformity of the products they market.
- Drone operators (aerial photography companies, infrastructure inspection, precision agriculture, logistics, etc.): must verify that the equipment they use maintains its regulatory compliance.
- Notified bodies and testing laboratories: will need to update their conformity assessment procedures to reflect the new reference standards.
Practical example
Imagine a Spanish company that manufactures drones for infrastructure inspection and markets them in several EU countries. Until now, its declaration of conformity referred to the harmonized standards contained in Decision 2024/2103.
With the entry into force of Decision 2026/2539 on 17 November 2026, this company must:
- Identify which specific harmonized standards have changed compared to Decision 2024/2103.
- Verify whether its products already comply with the new standards or whether they require technical adaptations.
- Update the EU declaration of conformity to reflect the new regulatory references.
- If it distributes through third parties, communicate the updated compliance status to its distributors.
If it does not act and a market inspector detects that the declaration of conformity cites obsolete standards, the product may be withdrawn from the European market until the situation is remedied, with the resulting impact on sales, reputation and business relationships.
What should companies do now?
- Identify affected models: Review the product catalog and determine which are subject to Delegated Regulation (EU) 2019/945 and, therefore, to the updated harmonized standards.
- Compare old and new standards: Contrast the list of standards from Decision 2024/2103 with that of the new Decision 2026/2539 to identify which standards have changed or been replaced.
- Audit technical documentation: Verify that the technical files, tests and EU declarations of conformity of each product are consistent with the new regulatory references.
- Update declarations of conformity: If any reference standard has changed, formally update the EU declaration of conformity before continuing to market the product.
- Communicate to the distribution chain: Inform importers, distributors and end customers about the updated compliance status of the products.
- Consult with a notified body: If there are doubts about whether the product continues to meet the essential requirements under the new standards, contact a notified body for an updated conformity assessment.
The risk of inaction is concrete: products withdrawn from the market, inability to obtain or maintain CE marking, and liability before market surveillance authorities of the member states.
Frequently asked questions
What are harmonized standards for drones and why do they change?
Harmonized standards are technical standards developed by European standardization bodies whose compliance grants presumption of conformity with the essential safety requirements of Delegated Regulation (EU) 2019/945. They are updated periodically to reflect technological advances or new safety requirements. Decision 2026/2539 replaces the references from Decision 2024/2103 with the list updated to November 2026.
What if my drone already has CE marking but does not comply with the new standards?
The CE marking obtained under the previous standards may no longer be valid if the new harmonized standards introduce different requirements. The manufacturer or importer must review whether conformity still applies. If not, they must update the declaration of conformity and, if necessary, submit the product to new tests. Marketing a product with an outdated declaration of conformity may result in market withdrawal by market surveillance authorities.
When did this update of drone standards come into force?
Implementing Decision (EU) 2026/2539 came into force on 17 November 2026, one day before its publication in the Official Journal of the EU (18 November 2026). Therefore, the obligation to refer to the new harmonized standards is immediate.
Do drone operators (non-manufacturers) also need to do something?
Yes. Operators and distributors must verify that the equipment they use or market complies with the new regulatory references. Although the primary responsibility lies with the manufacturer or importer, operating with non-compliant equipment can lead to legal and liability issues, especially in regulated sectors such as infrastructure inspection, agriculture or logistics.
Where can I consult the updated list of harmonized standards for drones?
The complete and updated list of harmonized standards applicable to unmanned aircraft is contained in the Implementing Decision (EU) 2026/2539, published in the Official Journal of the European Union on 18 November 2026. This decision amends and updates the previous list contained in Decision 2024/2103.
Official source
Consult full regulation in official source
Disclaimer: This article is for informational purposes only and does not constitute legal advice. For specific decisions, consult a qualified professional. Source: https://eur-lex.europa.eu/./legal-content/AUTO/?uri=OJ:L_202602539