Key data
| Regulation | Corrigendum to Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery |
|---|---|
| Publication | 20 November 2026 (EU Official Journal) |
| Entry into force | Not specified in the corrigendum |
| Repealed norms | Directive 2006/42/CE and Council Directive 73/361/CEE |
| Affected parties | Manufacturers, importers and distributors of industrial machinery in the EU |
| Category | European Regulation |
| Direct application | Yes — does not require national transposition in any Member State |
If your company manufactures, imports or distributes industrial machinery in Europe, this corrigendum affects you directly. Regulation (EU) 2023/1230 already replaced the historic Directive 2006/42/CE, and now the EU Official Journal publishes corrections to the original text that may alter specific technical requirements, application deadlines or definitions that determine whether your product complies with current regulations.
The critical difference from the previous directive: as a European regulation, it is directly applicable in all Member States without national transposition. There is no room for local adaptation. What the corrected text says is law in Spain, France, Germany and the rest of the EU from the moment it enters into force.
What does this regulation establish?
Regulation (EU) 2023/1230, approved on 14 June 2023, establishes the essential health and safety requirements for the design and manufacture of machinery marketed in the European market. It repeals two previous norms:
| Repealed norm | Description | Replaced by |
|---|---|---|
| Directive 2006/42/CE | Directive on machinery of the European Parliament and of the Council | Regulation (EU) 2023/1230 |
| Directive 73/361/CEE | Council Directive on machinery (historic regulation) | Regulation (EU) 2023/1230 |
The corrigendum published on 20 November 2026 introduces corrections to the text of the original regulation. These corrections may affect:
- Technical requirements for machinery design and manufacture
- Application deadlines established in the regulation
- Key definitions that determine the scope of the regulation and which products are subject to it
The change from directive to regulation is not a minor detail: under Directive 2006/42/CE, each Member State could introduce nuances in national transposition. With Regulation (EU) 2023/1230, the text is uniform throughout the EU. Any correction published in the Official Journal affects all companies in the European market simultaneously.
Economic and operational impact
The real impact of this corrigendum depends on the scope of the corrections introduced, which may be of different nature:
- If technical requirements are corrected: companies may need to review or redesign components, update technical documentation and repeat conformity assessments.
- If deadlines are corrected: the time available to adapt products to the new regulatory framework may be shortened or extended.
- If definitions are corrected: some products that were previously outside the scope of the regulation may become included, or vice versa.
The most serious economic risk is product withdrawal from the European market due to non-compliance. For manufacturers with significant production volumes or importers with stock in circulation, this scenario may result in considerable direct losses, in addition to reputational damage and relaunching costs.
Companies that had already adapted their procedures to Regulation (EU) 2023/1230 must verify that the corrigendum does not invalidate part of that work. Those still in the process of transitioning from Directive 2006/42/CE must incorporate the corrections from the start.
Who does it affect?
- Industrial machinery manufacturers based in the EU that design and produce machinery for the European market
- Importers that introduce machinery manufactured outside the EU into the European market
- Distributors that market machinery in the EU, regardless of its origin
- Quality and regulatory compliance departments responsible for CE marking and technical documentation
- Notified bodies that certify the conformity of high-risk machinery
- Legal advisors and technical consultants that accompany companies in the sector in certification processes
Practical example
A Spanish machinery manufacturer for the agri-food sector had completed in 2024 its process of adapting to the requirements of Regulation (EU) 2023/1230, updating its technical documentation, conformity declarations and CE marking procedures.
With the publication of this corrigendum on 20 November 2026, the regulatory compliance officer must review the corrected text to identify whether any of the corrections affect the technical requirements applicable to their production lines. If the corrigendum modifies, for example, a definition that expands the scope of the regulation to a type of component that was previously excluded, the company will need to update its conformity assessment before the correction enters into force.
Failing to review the corrigendum and continuing to market with the previous documentation could expose the company to an order to withdraw its products from the European market, with the operational and reputational cost that this entails.
What should companies do now?
- Download and review the text of the corrigendum published in the EU Official Journal on 20 November 2026, identifying which articles or annexes have been corrected.
- Compare the corrections with internal procedures for conformity and CE marking already implemented for Regulation (EU) 2023/1230.
- Assess whether the corrections affect products in commercialization or in the design phase, and determine whether it is necessary to update technical documentation or repeat conformity assessments.
- Consult with the corresponding notified body if the company operates with machinery in categories that require third-party certification, to confirm whether the corrigendum requires new actions.
- Update the EU declaration of conformity if any of the corrections modifies the essential requirements applicable to marketed products.
- Inform the supply chain — component suppliers, distributors and industrial customers — of any change that may affect products already delivered or in transit.
Frequently asked questions
Does Regulation (EU) 2023/1230 need to be transposed in Spain?
No. As it is a European regulation and not a directive, it is directly applicable in all EU Member States, including Spain, without the need for national transposition. This distinguishes it from Directive 2006/42/CE that it repeals, which did require transposition in each country.
What norm does Regulation (EU) 2023/1230 repeal?
It repeals two norms: Directive 2006/42/CE of the European Parliament and of the Council on machinery, and Council Directive 73/361/CEE. Both are entirely replaced by the new regulation.
What happens if my company does not update conformity to the corrected text?
Non-compliance with Regulation (EU) 2023/1230 may result in product withdrawal from the European market. The corrections published in the corrigendum may affect technical requirements, deadlines or key definitions that determine whether a product can be legally marketed in the EU.
Which companies does this machinery regulation affect?
It affects manufacturers, importers and distributors of industrial machinery in the EU. Any company that designs, manufactures, imports or distributes machinery in the European market must comply with the essential health and safety requirements established in the regulation and its corrections.
What aspects may have changed with the corrigendum published on 20/11/2026?
The corrections published in the corrigendum may affect specific technical requirements, application deadlines or key definitions of the regulation. It is essential to review the corrected text in the EU Official Journal to identify which articles or annexes have been modified compared to the original text from June 2023.
Official source
Consult the complete regulation in the official source
Disclaimer: This article is for informational purposes only and does not constitute legal advice. For specific decisions, consult a qualified professional. Source: https://eur-lex.europa.eu/./legal-content/AUTO/?uri=OJ:L_202690990