European Regulations

New MTD Rules 2026: What Changes for Industries with Environmental Permits

E
Equipo Editorial CambiosLegales
Nov 20, 2026 7 min 9 views

Key data

RegulationCommission Implementing Decision (EU) 2026/2545 of 13 November 2026
Modified standardImplementing Decision 2012/119/EU
Reference DirectiveIndustrial Emissions Directive 2010/75/EU (Article 13, paragraph 3, letters c) and d))
Publication20 November 2026
Entry into forceNot specified in the regulation
Affected partiesIndustries with integrated environmental authorization and national environmental authorities
CategoryEuropean Regulation
Official referenceOJ:L_202602545 — C(2026)7990
Impact analysis reserved for subscribers
The detailed impact analysis of this regulation is available with the PRO and Business plans. Access the full content and receive personalized alerts.
From €9.99/month · Cancel anytime

Industrial installations subject to integrated environmental authorization in Spain and throughout the EU operate under technical conditions set by MTD reference documents (Best Available Techniques). These documents are, in practice, the standard that determines what emissions are tolerated and what technology is required. The Commission Implementing Decision (EU) 2026/2545, published on 20 November 2026, modifies the rules of the process by which these documents are developed, reviewed and validated, updating the previous Implementing Decision 2012/119/EU.

The change is not cosmetic: it directly affects how industrial data is collected, how MTD conclusions are drafted or revised, and how their quality is ensured. And MTD conclusions are binding: when they are published or updated, competent authorities must review the permits of affected installations.

What does this regulation establish?

Implementing Decision 2026/2545 modifies Decision 2012/119/EU, which regulated the practical procedures for information exchange between Member States and the European Commission under the Industrial Emissions Directive 2010/75/EU. The specific aspects that are modified are:

Regulated aspectPrevious situation (2012/119/EU)Updated situation (2026/2545)
Collection of industrial dataProcedures established in 2012New updated data collection rules
Drafting of MTD documentsProcess defined over a decade agoRevised procedures for drafting and development
Review of MTD documentsCriteria and deadlines from 2012New review criteria and procedures
Quality assuranceQuality control according to 2012 standardsNew framework for control and quality assurance
Information exchangeArt. 13.3 c) and d) DIR 2010/75/EU applied with 2012 rulesUpdated practical procedures between Member States and Commission

MTD documents are the cornerstone of the industrial environmental permit system in Europe. When the Commission publishes new MTD conclusions, national authorities have the obligation to review and, if appropriate, update the integrated environmental authorizations of affected installations. This may involve new emission limits, technological requirements or adaptation deadlines.

Economic and operational impact

The direct impact of this Decision is procedural: it improves the process by which technical standards are generated. But the indirect impact on companies can be significant:

  • Environmental permit reviews: When MTD conclusions derived from these new procedures are updated, competent authorities will have to review integrated environmental authorizations. This may involve new technical requirements and adaptation costs not foreseen in the current budget.
  • Greater rigor in data collection: The new procedures for collecting industrial data may mean that companies must report more detailed information or more frequently during MTD review processes.
  • Technology adaptation deadlines: Updated MTD conclusions typically set deadlines for installations to adopt best available techniques. The earlier a company anticipates these changes, the lower the adaptation cost.
  • Risk of non-compliance: Operating with permit conditions that are outdated compared to new MTD conclusions may result in enforcement procedures by the competent environmental authority.

Who does it affect?

  • Industrial installations with integrated environmental authorization (IEA): Any company operating under the Industrial Emissions Directive 2010/75/EU regime in Spain or any EU Member State.
  • Sectors typically affected by the IED: Refineries, cement plants, steel mills, chemical plants, waste management facilities, combustion plants, paper industry, ceramic industry, slaughterhouses and large-scale food processing plants, among others.
  • National and regional environmental authorities: They are responsible for applying the new information exchange procedures with the Commission and reviewing permits when MTD conclusions are updated.
  • Environmental consultants and advisors: Professionals who advise industrial companies on obtaining and maintaining their integrated environmental authorizations.
  • Operations directors and environmental managers: Those who must anticipate changes in permit conditions and plan technological investments.

Practical example

Imagine a cement plant operating under integrated environmental authorization in Castilla-La Mancha. Its current permit conditions set NOx and SO₂ emission limits based on the MTD conclusions of the current reference document for the cement sector.

With the new procedures established by Decision 2026/2545, the European Commission may review that MTD document with more rigorous and up-to-date data. If the new MTD conclusions set stricter emission limits, the regional environmental authority will be obliged to review that plant's authorization and require it to adapt to the new standards within the established deadline.

For the company, this may translate into the need to install new purification systems, modify production processes or make significant technological investments. Anticipating that review—by monitoring ongoing MTD processes for your sector—allows you to plan investment with time and avoid urgent adaptation costs or penalties for non-compliance.

Do you need to monitor this and other regulations?

Check the full details on CambiosLegales

What should companies do now?

  1. Identify whether your installation is subject to the Industrial Emissions Directive 2010/75/EU. If you have integrated environmental authorization, this regulation directly affects you.
  2. Locate the MTD reference document for your sector. Check on the EIPPCB (European IPPC Bureau) portal which MTD document applies to your activity and whether it is under review.
  3. Review the current conditions of your integrated environmental authorization. Compare the emission limits and technical conditions of your permit with the current status of applicable MTD conclusions.
  4. Participate in MTD consultation processes if your sector is under review. The new data collection procedures may require your installation to provide technical information. Being present in the process allows you to influence the resulting standards.
  5. Plan technological investments in advance. If new, more demanding MTD conclusions are anticipated for your sector, evaluate the available technological options now to avoid having to adapt under pressure and with short deadlines.
  6. Coordinate with your environmental or legal advisor. The permit review resulting from new MTD conclusions has legal and operational implications that require specialized support.

Frequently asked questions

What are MTD documents and why do they affect my environmental permit?

MTD documents (Best Available Techniques) are reference documents prepared by the European Commission that establish the technical standards and emission limits that must be met by industrial installations subject to the Industrial Emissions Directive 2010/75/EU. When new MTD conclusions are published, competent authorities are obliged to review the integrated environmental authorizations of affected installations and may require technical adaptations.

What exactly changes with Decision 2026/2545 compared to the previous 2012 regulation?

Decision 2026/2545 modifies Implementing Decision 2012/119/EU in four specific aspects: the procedures for collecting industrial data, the rules for drafting MTD documents, the procedures for their review, and the quality assurance system for these documents. It also updates the practical rules for information exchange between Member States and the European Commission according to Article 13, paragraph 3, letters c) and d) of Directive 2010/75/EU.

When does this decision enter into force and what deadline do I have to adapt?

Implementing Decision (EU) 2026/2545 was published on 20 November 2026, but the regulation does not specify a specific entry into force date or adaptation deadlines for companies. The specific adaptation deadlines for each installation will depend on when new revised MTD conclusions are published under these procedures and what each integrated environmental authorization establishes.

Where can I check if the MTD document for my sector is being reviewed?

You can check the status of MTD review processes on the official portal of the European IPPC Bureau (EIPPCB), which is part of the Joint Research Centre of the European Commission. There you will find the current reference documents and the status of ongoing review processes for each industrial sector.

What happens if my installation does not adapt to the new MTD conclusions when its permit is reviewed?

If the competent environmental authority reviews your integrated environmental authorization as a result of new MTD conclusions and your installation does not comply with the new conditions within the established deadline, you may face enforcement procedures for non-compliance with the Industrial Emissions Directive 2010/75/EU, with possible financial penalties and, in serious cases, suspension of activities. The regulation does not specify specific penalty amounts, which depend on the national transposition legislation.

Official source

Consult complete regulation on official source

Disclaimer: This article is for informational purposes only and does not constitute legal advice. For specific decisions, consult a qualified professional. Source: https://eur-lex.europa.eu/./legal-content/AUTO/?uri=OJ:L_202602545



Share:
E
Equipo Editorial CambiosLegales

El equipo editorial de CambiosLegales analiza diariamente los cambios normativos que afectan a empresas y autónomos en España, ofreciendo análisis pro...

Comments

No comments yet. Be the first to comment!

Leave a comment
Activate alerts

Almost there