Key data
| Regulation | Decision of the EEA Joint Committee No. 196/2026, of 10 July 2026 |
|---|---|
| Official reference | OJ:L_202602431 — EUR-Lex |
| Publication | 19 November 2026 |
| Entry into force | 10 July 2026 |
| Annex modified | Annex II of the EEA Agreement (Technical regulations, standards, testing and certification) |
| Affected territories | Norway, Iceland and Liechtenstein (EEA countries outside the EU) |
| Affected parties | Companies marketing products with technical certification in the EEA |
| Category | European Regulation |
| Year | 2026 |
If your company sells or purchases products with technical certification in Norway, Iceland or Liechtenstein, this decision directly affects you. Decision 196/2026 of the EEA Joint Committee, adopted on 10 July 2026, modifies Annex II of the EEA Agreement, which regulates technical regulations, standards, testing and certification in the European Economic Area.
In practice, this means that new technical regulations approved in the EU are incorporated into the EEA framework, with direct effect on the three countries that are part of the EEA without being EU members. If you already comply with technical requirements for the EU market, you must check whether that compliance remains sufficient or whether the changes introduced require additional steps.
What does this regulation establish?
The EEA Agreement allows Norway, Iceland and Liechtenstein to participate in the European single market without being EU members. For this to work, the EEA Joint Committee periodically incorporates EU technical regulations into Annex II of the Agreement, which covers technical regulations, standards, testing and certification.
Decision 196/2026 updates that annex, incorporating or adapting EU technical regulations to the EEA framework. The specific effects it establishes are:
- Incorporation of EU technical regulations into the EEA Agreement, making them applicable in Norway, Iceland and Liechtenstein.
- Possible new testing requirements for certain productive sectors.
- Possible changes in the conditions of CE marking or homologation required in non-EU EEA markets.
- Extension of technical compliance obligations to the three EEA countries outside the EU.
The decision does not specify in its summary the specific sectors or EU technical regulations incorporated. To know the exact details of what technical regulations have been added to Annex II, it is necessary to consult the full text published on EUR-Lex.
Economic and operational impact
The economic impact of this decision depends directly on whether the changes introduced in Annex II affect the products your company markets in the EEA. The possible scenarios are:
- No operational changes: If the incorporated technical regulations do not affect your product categories, there is no additional cost.
- New testing or certifications: If the changes introduce new testing or homologation requirements, companies will have to bear the costs of recertification before notified bodies or accredited laboratories.
- CE marking review: If the changes affect CE marking conditions, it may be necessary to update technical documentation and conformity declarations.
- Market access blocked: Products that do not meet the new requirements could be blocked at customs or withdrawn from the market in Norway, Iceland or Liechtenstein.
The entry into force date is 10 July 2026, prior to the publication date (19 November 2026). This implies that companies operating in these markets must urgently review whether they were already in a situation of non-compliance since July.
Who does it affect?
- Spanish exporters selling products with technical certification requirements in Norway, Iceland or Liechtenstein.
- Importers bringing products from these three countries to the Spanish or EU market.
- Manufacturers of industrial, electronic, construction, machinery or other products subject to technical regulation in the EEA.
- Compliance and quality managers in companies with commercial activity in the EEA.
- Technical advisors and certification consultants advising companies on compliance processes for European markets.
- CFOs and operations directors who must anticipate possible recertification costs or supply chain delays.
Practical example
A Spanish industrial machinery manufacturer that exports its products to Norway currently has CE marking and a conformity declaration in accordance with EU regulations in force until June 2026.
With the entry into force of Decision 196/2026 on 10 July 2026, the EU technical regulations incorporated into Annex II of the EEA Agreement become mandatory in Norway. If among the updated technical regulations there is one applicable to its machinery category, the company must:
- Verify whether its current conformity declaration remains valid under the new requirements of Annex II.
- Contact its notified body to confirm whether a new conformity assessment is required.
- Update technical documentation and, if necessary, submit the product to new testing.
If the company does not act and its products are already on the Norwegian market without complying with the new requirements since 10 July 2026, it could face requirements from Norwegian market surveillance authorities.
What should companies do now?
- Consult the full text of Decision 196/2026 on EUR-Lex to identify exactly what technical regulations have been incorporated into Annex II of the EEA Agreement.
- Map affected products: Cross-reference the product categories that the company markets in Norway, Iceland or Liechtenstein with the modified technical regulations.
- Review current compliance documentation: Check whether current conformity declarations, test certificates and CE markings remain valid under the new requirements.
- Contact the notified body or accredited laboratory: If there are doubts about the validity of current certification, consult with the corresponding notified body before continuing to market in the affected EEA markets.
- Update technical documentation if necessary: Issue new conformity declarations or submit products to additional testing if the changes to Annex II require it.
- Review contracts and commercial agreements: Verify whether contracts with distributors or customers in Norway, Iceland or Liechtenstein include compliance clauses that may be affected.
Frequently asked questions
What is Annex II of the EEA Agreement and why is it modified?
Annex II of the EEA Agreement regulates technical regulations, standards, testing and certification applicable in the European Economic Area, including Norway, Iceland and Liechtenstein. It is modified periodically through decisions of the EEA Joint Committee to incorporate EU technical regulations and maintain regulatory equivalence between EEA countries and the European Union. Decision 196/2026, adopted on 10 July 2026, is the latest published update.
Since when is it mandatory to comply with the new requirements of Annex II?
Decision 196/2026 entered into force on 10 July 2026, the date of its adoption by the EEA Joint Committee. Although it was published on 19 November 2026, the new requirements are enforceable from July. Companies operating in Norway, Iceland or Liechtenstein must verify whether they were already in compliance from that date.
Is my current CE marking still valid in Norway after this decision?
It depends on what specific technical regulations have been incorporated into Annex II through Decision 196/2026. If the updated technical regulations affect your product category, it may be necessary to update the conformity declaration or perform new testing. It is essential to consult the full text of the decision on EUR-Lex and, if in doubt, contact the corresponding notified body.
Does this regulation affect only Norway, Iceland and Liechtenstein or also the EU?
Decision 196/2026 specifically affects the three EEA countries that are not EU members: Norway, Iceland and Liechtenstein. Its objective is to extend to these countries the technical regulations already in force in the EU. Companies that only operate within the EU are not affected by this decision, although they are affected by the EU technical regulations that are incorporated into the EEA Agreement.
What happens if my company continues to market in the EEA without complying with the new requirements?
Products that do not comply with the requirements of the updated Annex II may be subject to actions by the market surveillance authorities of Norway, Iceland or Liechtenstein, including requirements for market withdrawal or customs blockade. To avoid this risk, it is necessary to urgently review the compliance of affected products, given that entry into force was 10 July 2026.
Official source
Consult complete regulation in official source
Disclaimer: This article is for informational purposes only and does not constitute legal advice. For specific decisions, consult a qualified professional. Source: https://eur-lex.europa.eu/./legal-content/AUTO/?uri=OJ:L_202602431