Key data
| Regulation | EEA Joint Committee Decision No. 197/2026 |
|---|---|
| Publication | 19 November 2026 |
| Entry into force | 10 July 2026 |
| Affected parties | Companies marketing technical products in the European Economic Area |
| Category | European Regulation |
| Year | 2026 |
| Amended Annex | Annex II of the EEA Agreement (Technical regulations, standards, testing and certification) |
| Non-EU countries affected | Norway, Iceland and Liechtenstein |
If your company sells or purchases technical products in Norway, Iceland or Liechtenstein, this decision directly affects you. EEA Joint Committee Decision No. 197/2026, adopted on 10 July 2026 and published on 19 November 2026, amends Annex II of the EEA Agreement, which is the framework governing which technical standards, testing and certifications are valid throughout the European Economic Area.
The purpose of this amendment is to incorporate or adjust EU technical regulations into the EEA framework, so that the three non-EU countries in the area (Norway, Iceland and Liechtenstein) apply exactly the same standards as EU Member States. When this occurs, companies already operating under the previous standards must verify whether their products, processes or certifications continue to meet the new requirements.
What does this regulation establish?
The EEA Agreement allows Norway, Iceland and Liechtenstein to participate in the European single market without being EU members. For this to work, their technical standards must be equivalent to those of the EU. The EEA Joint Committee is the body responsible for periodically updating the annexes to the Agreement when the EU approves new technical regulations.
With Decision 197/2026, Annex II is specifically amended, which covers:
- Technical regulations applicable to products
- Harmonised standards for testing and verification
- Certification and approval procedures
The amendment means that one or more EU technical standards are incorporated into the EEA framework, which requires economic operators marketing products in these countries to verify whether their current certifications comply with the new incorporated requirements.
Economic and operational impact
The direct impact for companies occurs on two levels:
- Market access: If a product already certified under the previous standards does not meet the new requirements incorporated into Annex II, it may be blocked at customs or withdrawn from the market in Norway, Iceland or Liechtenstein.
- Re-approval cost: Obtaining a new technical certification or adapting a manufacturing process to comply with updated standards can involve significant costs in testing, documentation and commercial downtime.
The risk is particularly relevant for companies that continuously export to these markets and do not have a systematic process for monitoring regulatory changes in the EEA. A certification that was valid yesterday may cease to be valid from 10 July 2026, the date this decision enters into force.
The departments of regulatory compliance and quality are the first to act: review the catalogue of affected products and compare the updated technical standards with current certifications.
Who does it affect?
- Spanish manufacturers and exporters marketing technical products in Norway, Iceland or Liechtenstein
- Importers bringing products from these three countries to the Spanish or European market
- Distributors and logistics operators managing goods subject to technical certification in the EEA
- Quality, compliance and regulatory departments of industrial, technological or equipment companies
- Foreign trade advisors and consultants operating in the EEA field
- Certification bodies and testing laboratories issuing approvals recognised in the EEA
Practical example
Imagine a Spanish manufacturer of industrial electrical equipment that regularly exports to Norway. Its products are certified under the technical standards of the EEA Agreement in force until June 2026.
With the entry into force of Decision 197/2026 on 10 July 2026, Annex II of the EEA Agreement incorporates new EU technical standards. If any of these standards affect the category of industrial electrical equipment manufactured by this company, its current certifications may have become outdated.
The practical result: the Norwegian distributor may encounter problems in importing or marketing the product, which generates delays, additional re-testing costs and, in the worst case, the need to withdraw the product from the market until obtaining the new approval. To avoid this, the quality department of this company should have reviewed the standards incorporated into Annex II from 10 July and verified whether its certifications remain compliant.
What should companies do now?
- Identify affected products: Review the catalogue of products marketed in Norway, Iceland or Liechtenstein that are subject to technical certification under Annex II of the EEA Agreement.
- Consult updated technical standards: Access the full text of Decision 197/2026 on EUR-Lex to identify which specific standards have been incorporated or amended in Annex II.
- Compare current certifications: The quality or compliance department must verify whether the current approvals for each product remain valid under the new requirements.
- Initiate re-approval process if necessary: If any certification has become outdated, contact the relevant certification body to initiate the adaptation process without delay, as the standard has been in force since 10 July 2026.
- Communicate with distributors and local partners: Inform distributors in non-EU EEA countries about the compliance status of products to avoid customs or marketing issues.
- Establish a regulatory alert system: Implement a process for periodic monitoring of EEA Joint Committee decisions to anticipate future changes to Annex II before they enter into force.
Frequently asked questions
When did EEA Joint Committee Decision 197/2026 enter into force?
Decision No. 197/2026 entered into force on 10 July 2026, the date of its adoption by the EEA Joint Committee. Its official publication took place on 19 November 2026, but the regulatory effects are computed from July. Companies must verify whether their products already comply with the new requirements from that date.
Which countries are obliged to apply the new requirements of EEA Annex II?
The non-EU countries of the European Economic Area obliged to apply the new requirements are Norway, Iceland and Liechtenstein. EU Member States already directly apply European technical regulations, so this decision has an impact mainly on commercial operations with these three countries.
What happens if my company continues to export with certifications that are no longer valid under the new Annex II?
Non-compliance can result in market access barriers in Norway, Iceland or Liechtenstein, including goods detention at customs, product withdrawal from the market or the requirement for new approvals before being able to market. It is recommended to review current certifications urgently.
Which department in the company should manage compliance with this regulation?
The departments of regulatory compliance and quality are the primary responsible for reviewing updated technical standards and comparing them with current certifications. In companies with significant export activity in the EEA, foreign trade teams and specialised legal advisors should also be involved.
Where can I consult the full text of Decision 197/2026 and the incorporated technical standards?
The full text is available in the EU Official Journal through EUR-Lex. It is the official source where the specific technical standards incorporated into Annex II of the EEA Agreement through this decision are detailed.
Official source
Consult complete regulation at official source
Disclaimer: This article is for informational purposes only and does not constitute legal advice. For specific decisions, consult a qualified professional. Source: https://eur-lex.europa.eu/./legal-content/AUTO/?uri=OJ:L_202602463