European Regulations

Corrected PPE Standards 2026: What Manufacturers of Gloves, Rainwear and Eye Protection Must Review

E
Equipo Editorial CambiosLegales
Nov 13, 2026 7 min 15 views

Key data

RegulationCommission Implementing Decision (EU) 2026/2505 of 12 November 2026
Publication13 November 2026
Entry into forceNot specified in the standard
Affected partiesManufacturers, importers and distributors of PPE: hairdressing gloves, protective clothing against rain and eye and facial protection devices for occupational use
CategoryEuropean Regulation
Base RegulationRegulation (EU) 2016/425 of the European Parliament and of the Council
Corrected standardImplementing Decision (EU) 2026/1971, which in turn amended Decision 2026/1279
Impact analysis reserved for subscribers
The detailed impact analysis of this regulation is available with the PRO and Business plans. Access the full content and receive personalized alerts.
From €9.99/month · Cancel anytime

If you manufacture, import or distribute gloves for hairdressers, waterproof work clothing or eye protection glasses and screens, you have an urgent task: to verify that your technical documentation and CE certification process are aligned with the harmonised standards in their corrected version.

The Implementing Decision (EU) 2026/2505, published on 13 November 2026, corrects errors detected in Decision 2026/1971. The latter had already amended Decision 2026/1279, which sets out the harmonised standards for personal protective equipment (PPE) under the Regulation (EU) 2016/425. A chain of three standards whose final link—the correction—is the one that now sets the valid reference.

What does this regulation establish?

Harmonised standards are technical specifications whose publication in the EU Official Journal grants manufacturers the so-called presumption of conformity: if your product complies with the published harmonised standard, it is presumed to comply with the essential requirements of Regulation (EU) 2016/425 and, therefore, can bear the CE marking.

This Decision corrects errors in the references of harmonised standards corresponding to three categories of PPE:

PPE CategoryUse
Protective gloves for hairdressersProtection against chemical and biological risks in hairdressing salons and beauty centres
Protective clothing against rainProtection against adverse weather conditions in outdoor work environments
Eye and facial protection devices for occupational useProtection of eyes and face against mechanical, chemical, radiation or other risks at work

The correction implies that the technical references published in Decision 2026/1971 contained errors. The valid and binding version is now the one contained in Decision 2026/2505. Any technical documentation, declaration of conformity or certification file prepared on the basis of the erroneous standard must be reviewed and, if necessary, updated.

Economic and operational impact

The direct impact is not a new fee or automatic fine, but it can generate operational costs and market risks relevant to the affected companies:

  • Review of technical documentation: If the product documentation was prepared citing the erroneous standard from Decision 2026/1971, it must be updated to reference the corrected version. This involves technical team time and, in some cases, fees from notified bodies.
  • Ongoing certification processes: Companies that had a certification process underway based on the incorrect standard must verify with their notified body whether it is necessary to restart or adjust any phase of the process.
  • Risk of loss of presumption of conformity: If the product is marketed with documentation citing a standard that has been corrected and is no longer the valid reference, the CE presumption of conformity may be called into question during a market surveillance inspection.
  • Review of contracts and specifications with customers: If contracts for supply specify specific versions of harmonised standards, it may be necessary to update those references.

The actual cost depends on the number of affected references and the status of each company's files. For manufacturers with a single affected product, it may be minor management. For importers with broad catalogues in all three categories, the review effort can be significant.

Who does it affect?

  • Manufacturers of protective gloves for hairdressers marketing in the EU with CE marking.
  • Manufacturers of protective clothing against rain for occupational use (jackets, trousers, waterproof work overalls).
  • Manufacturers of glasses, screens and other eye and facial protection devices for work environments.
  • Importers of any of these three categories of PPE that introduce products into the European market.
  • Distributors that have verified the conformity of their products based on the standards of Decision 2026/1971.
  • Notified bodies that are processing certification files for these categories.
  • Procurement and OHS managers of companies that purchase these PPE and require updated conformity documentation from their suppliers.

Practical example

A Spanish manufacturer of eye protection glasses for industrial use began in October 2026 the process of updating its EU declaration of conformity, citing the harmonised standards published in Decision 2026/1971. Before closing the file and sending it to its notified body, Decision 2026/2505—published on 13 November 2026—corrects those references.

If the manufacturer does not detect the correction and submits the documentation with the erroneous references, its declaration of conformity will cite a standard that is no longer the valid version in the Official Journal. In the event of a market surveillance inspection, this may call into question the presumption of conformity of the product and force the documentation to be redone, with the consequent delay in marketing and additional cost.

The solution is simple but requires attention: before closing any certification file or declaration of conformity for these three categories of PPE, verify that the references of harmonised standards correspond to Decision 2026/2505 and not to 2026/1971.

Do you need to track this and other regulations?

Check the full details on CambiosLegales

What should companies do now?

  1. Identify if you have affected products: Review your catalogue and check if you market protective gloves for hairdressers, protective clothing against rain or eye and facial protection devices for occupational use with CE marking.
  2. Review existing technical documentation: Locate the EU declarations of conformity and technical files for those products. Check which version of harmonised standard they cite: if they reference Decision 2026/1971, they must be updated to Decision 2026/2505.
  3. Contact your notified body: If you have certification processes underway for these categories, inform your notified body of the correction and request confirmation on whether the files in process are affected.
  4. Update contracts and specifications: If your supply contracts or technical specifications cite specific versions of harmonised standards, update the references to avoid discrepancies.
  5. Communicate to your distribution chain: If you are a manufacturer or importer, inform your distributors of the change so they can update the documentation they provide to their end customers.
  6. Monitor the Official Journal: Corrections to harmonised standards can occur at any time. Establish a process to monitor the OJEU for the categories of PPE you market.

Frequently asked questions

What specific PPE are affected by the correction of Decision 2026/2505?

The correction affects three categories of PPE regulated by Regulation (EU) 2016/425: protective gloves for hairdressers, protective clothing against rain for occupational use and eye and facial protection devices for use at work. If you market products in any of these categories with CE marking, you must verify that your technical documentation cites the standards in their corrected version.

What is the difference between Decision 2026/1971 and Decision 2026/2505?

Decision 2026/1971 amended the harmonised PPE standards contained in Decision 2026/1279, but contained errors in the technical references. Decision 2026/2505, published on 13 November 2026, corrects those errors. The valid and binding version to obtain CE presumption of conformity is now the one contained in Decision 2026/2505.

What if my declaration of conformity cites the erroneous standard from Decision 2026/1971?

If your declaration of conformity or technical file cites the references from Decision 2026/1971 without the subsequent correction, the presumption of conformity with Regulation (EU) 2016/425 may be called into question during a market surveillance inspection. It is necessary to update the documentation to cite the references corrected by Decision 2026/2505.

When does the correction of the harmonised PPE standards come into force?

Implementing Decision (EU) 2026/2505 was published in the EU Official Journal on 13 November 2026. The regulation does not specify an entry into force date different from that of its publication. It is recommended to act immediately and not wait to update the affected technical documentation.

Should I contact my notified body if I have an ongoing certification?

Yes. If you have a certification process underway for hairdressing gloves, waterproof work clothing or eye and facial protection, you must inform your notified body of the correction published in Decision 2026/2505 and confirm whether the files in process need to be adjusted before closure.

Official source

Consult full regulation in official source

Disclaimer: This article is for informational purposes only and does not constitute legal advice. For specific decisions, consult a qualified professional. Source: https://eur-lex.europa.eu/./legal-content/AUTO/?uri=OJ:L_202602505



Share:
E
Equipo Editorial CambiosLegales

El equipo editorial de CambiosLegales analiza diariamente los cambios normativos que afectan a empresas y autónomos en España, ofreciendo análisis pro...

Comments

No comments yet. Be the first to comment!

Leave a comment
Activate alerts

Almost there